Product Specification of Power over Ethernet Splitter / Adapter

• Efficiency: ~85% (at 24W load at 51V input, 12V model) (end to end)
• Humidity: 5% to 85% RH
• Indicators: PoE detection and classification<br>Output Power<br>Output power LED will blink in the event of an output overload and switch off.
• Input Current: 600mA maximum continuous as per draft IEEE 802.3at
• Input Voltage: 36V to 57V DC (for higher power operation an input voltage of 51V or higher is recommended) Extracts power from either data pair (pins 1,2,3,6) or spare pair (pin 4,5,7,8) or both pairs
• Isolation: 1500V Isolation between input and output
• Operating Temperature: -20 to 50&deg;C (-4 to 122&deg;F)<br>Any power device such as this splitter produces heat and requires de-rating to operate at ambient temperatures over 30?C (86?F). The plastic case is not suitable for outdoor operations at higher ambient conditions.
• Output Current: 2.75A, 2.44A, 2.2A, 1.83A, 1.57A, 1.37A (RMS)
• Output Power: 27 Watts maximum continuous. 30 Watts maximum. <br>Maximum output power is determined by the input (voltage and current). Current IEEE 802.3at standard permits 0.6A maximum input current. 30 Watts output possible by exceeding IEEE current limits to a maximum 0.75A
• Output Voltage: 12V, 13.5V, 15V, 18V, 21V, 24V (&#177;3%)
• PD Detection: Presents IEEE802.3af PD signature and Class 0 classification to PSE on any one pair
• Ports: RJ45 shielded connector for PoE Input
• Regulation: &#177; 3% (typical)
• Ripple: < 100mV p-p (at DC Jack)
• Storage Temperature: -20 to 65&deg;C (-4 to 149&deg;F)