Product Profile of Modified Elastomeric Adapter Bearing Pad
M.G.M. Rubber Company manufactures Modified Elastomeric Adapter Bearing Pad. M.G.M. Rubber Company is an ISO 9001:2000 certified company. Modified Elastomeric Adapter Bearing Pad is suited for Railways, Defense, Thermal Power, different Ordinance Factories and various Steel Plants. Modified Elastomeric Adapter Bearing Pad is available with massive variety in dynamic lateral & tensional load carrying range - 0.5 Kg to 30,000 Kg. Modified Elastomeric Adapter Bearing Pad is made of Steel, Cast Iron, and Aluminum etc.
Modified Elastomeric Adapter Bearing Pad has the following specifications:
Technology: Compression/ Transfer/Injection Molding
Polymer used: NR, SBR, NBR, HNBR, ACM, CR, PU, FE, EPDM, FKM, Silicon, CSM, PBR
Operation Temperature:-30 -70 degree C
Operational Atmosphere: Heavy/Dusty/Sandy/Corrosive/Salty
Operational Humidity: 0 to 100 percent
Technical specifications of Modified Elastomeric Adapter Bearing Pad are:
Polymer used: Natural Rubber suitably blended
Operation Temperature:-10 degree C to 70 degree C
Operational Atmosphere:
Heavy/Dusty/Sandy/Corrosive/Salty
Operational Humidity: 0 to 100%
Metal Parts Spec: Steel IS: 2062-Fe 410 WA
Shore Hardness: 70 to 80
Ash Content: 5% Maximum
Specific Gravity: 1.22 Maximum
Tensile Strength: 180 Kg/cm2 Minimum.
Elongation at Break: 250% Minimum.
Compression Set: 25% Max.
Bond Strength: 700 PSI / 49.21 Kg/ sq cm
Advantages of Modified Elastomeric Adapter Bearing Pad are:
Survives even in extreme atmospheric condition too.
Enhanced damping facility. Up to 50% of the applied Load.
Extremely rigid quality rubber-metal bonding. Shear Bond strength more than 700 PSI [49.2 Kg/Sq.cm].
