Product Specification of Incremental Encoder With Hub Shaft

• Flanges: Flange (Mounting of housing) : Tether
• Housing diameter: 76mm
• Housings: Protection class housing (EN 60529) : IP50 (IP65 optional)
• Input: Protection class shaft input (EN 60529) : IP40 or IP64
• Length: Minimum length of mountig shaft clamping ring front : 32 mm with Ø 15 ... 30, 35 mm with Ø >30 ... 42 & Mimimum length of mounting shaft clamping ring rear : Corresponding to total length of encoder
• Maximum Speed: For Ø 15 ... 25 mm at 70 ° C and IP64: max. 3600 rpm, For Ø >25 ... 42 mm bei 70 °C and IP64: max. 1800 rpm , For Ø 15 ... 42 mm at 70 °C and IP40: max. 6000 rpm , For Ø 15 ... 42 mm at 100 °C always: max. 1800 rpm
• Moment of Inertia: Approx. 140 ... 420 gcm² (depending on version)
• Shaft: Mounting of shaft : Front clamping ring, Rear clamping ring , Axial endplay of mounting shaft (hubshaft) : With stator coupling A (flexible): ± 2 mm, With 1x stator coupling (torsionally rigid): ± 0.5 mm , With 2x stator coupling (torsionally rigid): ± 0.3 mm
• Shaft Diameter: 15 mm / 16 mm / 18 mm / 20 mm / 24 mm / 25 mm / 27 mm / 28 mm / 30 mm / 32 mm / 38 mm / 40 mm (Hub shaft)
• Shock resistance: Shock resistance (DIN EN 60068-2-27) : 100 g = 1000 m/s² (6 ms)
• Torque: 3 ... 10 Ncm (depending on version)
• Vibration Resistance: Vibration resistance (DIN EN 60068-2-6) : 10 g = 100 m/s² (10 ... 2000 Hz)
• Operating Temperature: -25 °C... +100 °C
• Weight: 320 ... 580 g (depending on version) approx
• Storage Temperature: -25 °C... +100 °C
• Housing Material: Aluminum
• Connection: Cable, radial