Product Profile of Hydraulic Adhesion Tester With Steel Dolly
Hydraulic Adhesion Tester with Steel Dolly measures the adhesion by the required tensile pull on a dolly glued to the coating surface. The Hydraulic Adhesion Tester applied the force through the centre of the dolly by a hydraulically loaded pin. The Hydraulic Adhesion Tester is provided with a stainless steel dolly that is easily made with a snap on connector. The Hydraulic Adhesion Tester with Steel Dolly works on spin mounted force allowing testing in any position.
Caltech Engineering Services is manufacturing Hydraulic Adhesion Tester with Steel Dolly. Caltech Engineering Services supplies a wide range of coating thickness gauges, holiday detectors, pinhole detectors, jeep meter, surface profile gauges, wet film thickness gages, pit gauge, Cathodic disbonding tester, bridge-cam-gauge, fillet weld gage, chloride test kit, infrared thermometers and RH/dew point meter. The range of products finds application in Coating Inspection, Cathodic Protection, NACE Corrosion Testing, Welding Inspection etc.
Key Features of Hydraulic Adhesion Tester With Steel Dolly
- The adhesion is measured by the required tensile pull on a dolly glued to the coating surface.
- The force is applied through the centre of the dolly by a hydraulically loaded pin.
- The stainless steel dolly is easily made with a snap on connector.
- The force is spin mounted allowing testing in any position, this is significant as coating breakdown invariably starts at positions that were difficult to reach during surface preparation and application.
- Tests can be made on flat, concave and convex surfaces.
- Dollies can be supplied for measuring on the external and internal radius.
