Product Profile of Flame Proof Bucket Mono Block Pump
Flame Proof Bucket Mono Block Pump runs on 3 phase dry squirrel cage induction motor on 415 volts or 550 volts at 50 c/s. supply. The Mono Block Pump is available in weather proof and flame proof design with FLP 30 A Plug & Socket arrangement. The Mono Block Pump also comes with vertical 3" flange with internal thread. The Flame Proof Bucket Mono Block Pump is available with DC gland having On/ Off remote switch.
Key Features of Flame Proof Bucket Mono Block Pump
- Dry squirrel cage induction motor, insulation class F to work on 415 volts or 550 volts, 3 phase, 50 c/s. supply.
- The motor is suitable for 15 starts / stops per hour.
- The motor housing is suitable for IP65 protection.
- Thermal Overload Protection: Thermal overload motor protection to prevent over heating of the motor winding & terminals of the same shall be brought on to motor terminal board.
- Cable entry arrangement: FLP 30 A Plug & Socket arrangement Suitable for 4 core, 16 Sq. mm [FT-7] trailing cable as per IS:14494 & DGMS approved.
- Pump can handle water containing suspended coal particles of maximum 10 mm
- Motor at top and suction at bottom. Mounted on skirt base.
- Lifting hook at top, to lift the pump, rope or chain can be tied to listing hook.
- Vertical 3" flange with internal thread is provided to the pump casing.
- Discharge pipe is to be connected to this flange.
- On the top of the pump plug and socket is provided.
- 4 Core cable + earthing is to be connected to the pump. Three core are for E, Y & B power supply and fourth core is pilot wire with PLC-2 / PLC -4 cable earthing to be provided.
- D.C. gland is also provided with ON - OFF remote switch.
