1 Ad

Electrical Isolated Overspeed/ Underspeed Monitor

Product Category : Sensors And Indicators

Follow Product

Supplier : Pepperl+Fuchs (India) Private Limited

Key Features of Electrical Isolated Overspeed/ Underspeed Monitor

One-channel signal conditioner.
24 V DC supply [Power Rail].
Dry contact or NAMUR inputs.
Input frequency 1 mHz to 12 kHz.
2 relay contact outputs.
Start-up override.
Configurable by keypad.
Line fault detection [LFD].
Up to SIL2 acc. to IEC 61508.

Enquire now

Product Profile of Electrical Isolated Overspeed/ Underspeed Monitor

Electrical Isolated Overspeed/ Underspeed Monitor is designed with line fault detection facility. The Overspeed/ Underspeed Monitor is a one-channel signal conditioner and requires 24 V DC supply for operation. The Overspeed/ Underspeed Monitor is configurable by keypad and ensures two relay contact outputs. Electrical Isolated Overspeed/ Underspeed Monitor is rigid and durable in construction and comes in application specific design.

Key Features of Electrical Isolated Overspeed/ Underspeed Monitor

One-channel signal conditioner.
24 V DC supply [Power Rail].
Dry contact or NAMUR inputs.
Input frequency 1 mHz to 12 kHz.
2 relay contact outputs.
Start-up override.
Configurable by keypad.
Line fault detection [LFD].
Up to SIL2 acc. to IEC 61508.

Product Specification of Electrical Isolated Overspeed/ Underspeed Monitor

Connections: 300 mm fixed cable with M12 x 1, 4-pin connector
Indicators: Function display : 2 LEDs yellow for switching state Operating elements: 5-step rotary switch for operating modes selection (threshold setting and operating modes) Controls : Switch for setting the threshold values
Interface: Type : IO-Link Protocol : IO link V1.0
Lasers: class 2
Light: red, modulated light
Light Source: laser diode typ. service life 85,000 h at Ta = +25 ° C
Measuring Range: 0.2 ... 8 m
Method: Pulse Ranging Technology (PRT)
Working Voltage: 10 ... 30 V DC / when operating in IO link mode: 18 ... 30 V
Output: Signal output : 2 Push-pull outputs, short-circuit proof, reverse polarity protection
Parameter: MTTFd : 200 a Mission Time (TM) : 10 A Diagnostic Coverage (DC) : 0 %
Protection: IP65
Spot Diameter: < 10 mm at a distance of 8 m at 20 ° C
Standards: EN 60947-5-2, IEC 60825-1:2007
Wave length: 660 nm