Mysore-based Kirloskar Electric Company Ltd offers CNC 600 lathe with centralised lubrication system having tank of capacity 3 litres. The CNC system has resolution of 1 micron. It has positioning of x-axis and z-axis without load 0.02/100 mm and 0.03/300 mm resp.. The repeatability of these axes without load is ?0.005 mm and ?0.01 mm, respectively. Coolant system has 63-litre capacity tank with pump of capacity 36 lpm and motor power is 0.25 kW. It has input power supply [5 wire system] of 415 V +/- 10 percent; 50 HZ AC, 3 Phase. x-axis has specifications such as programmable stroke with turret is 285 mm; ball screw size is 322 mm x 10 pitch; rapid traverse rate is 8 m/min and feed rate is 1-2000 mm/min. z-axis has specifications likeball screw size 40 mm x 10 pitch; rapid traverse 8 m/min; and feed rate 1-2000 mm/min. Tool turret [type : BTP 80] has 8 stations with turning tool shank size of 25x25x150 mm3 and boring bar diameter of 40 mm. Tail stock with quill diameter of 90 mm has MT-5 centre and manual quill travel is 220 mm. Salient standard features of this lathe are as follows:

- High precision ball screws with bearing DC/AC servo drive package
- Variable speed spindle drive
- Eight station high-speed tool turret with boring bar holders
- Short pay back period with economical investment
- Optional features are: Machine with linear toolings Hand held data loader for memory expansion up to 128 kb EMA/hydraullic chuck/tail stock

Specifications of CNC 600 are as follows:
- Height of centre: 300 mm
- Swing over bed: 600 mm - Maximum turning diameter between centre with turret [BTP-80]: 33 mm
- Maximum facing diameter between centres: 470, 900, 400 mm
- Maximum turning length between centres with BTP80 Turret: 780 mm [for 900 ABC]; 1280 mm [for 1,400 ABC]
- Type of bed: flat for carriage, V and flat for tailstock
- Width across the bed ways: 380 mm
- Spindle nose: A2-8
- Spindle socket taper: MT-5
- Spindle bore: 80 mm
- Spindle speed-infinitely variable [speed range through 3 selectable lever positions]: 30-1500 rpm
- Spindle motor capacity: 11 kW DC
- Installation dimensions [approximately]: for 1000 ABC - 4860x2350x2150 mm3; for 1500 ABC - 5360 x 2350 x 2150 mm3
- Machine weight [approximately]: for 1000 ABC - 3070 kgs; for 1500 ABC - 3570 kgs
- Three jaw manual chuck [optional] with one set of hard and soft jaws: 305 mm
- Recommended voltage stabilizer rating: 300 KVA